Home / Products / Industry / Municipal

Municipal



CEMS

Continuous emission monitoring systems are used as a means to ensure that stack emissions are in compliance with applicable air emission standards and regulations. 

 

Novatech designs, manufactures and commissions complete CEM systems offering enhanced reliability and uptime, even for the most

...
PDF Novatech Analytical Solutions.PDF › Read more ›

Sample Draw Gas Detection Systems

In order to safely detect certain gases which may be lighter or heavier than air, it is always advisable to locate the sensor where the target gas may accumulate. This however, can lead to difficulty in accessing the sensor for routine maintenance & service.


For these situations, Novatech

...
PDF Novatech Analytical Solutions.PDF › Read more ›

Ultramat 23 (Multi-IR, O2)

The Siemens ULTRAMAT 23 is a cost-effective multicomponent analyzer for the measurement of up to 3 infrared sensitive gases using the NDIR principle, plus O2 using an electrochemical or paramagnetic Oxygen measuring cell.

 

The ULTRAMAT 23 is suitable for a wide range of standard applications,

...
PDF Siemens Ultramat 23 (EN).PDF › Read more ›

Ultramat / Oxymat 6 (IR + O2)

The Siemens ULTRAMAT/OXYMAT 6 "Combi-Analyzer" combines the features of the ULTRAMAT 6 and OXYMAT 6 in one analyzer in a 19" rack design.

Most frequently used for demanding applications, the ULTRAMAT 6 must meet high standards with regard to reliability and measuring quality. This is guaranteed by

...
PDF Siemens Ultramat / Oxymat 6 (EN).PDF › Read more ›

Fidamat 6 (Total Hydrocarbons)

Gas analyzers with an FID (flame ionization detector) are well suited for the continuous measurement of total hydrocarbons. To a first approximation, the display is proportional to the number of C atoms in the respective molecule.

 

The Siemens FIDAMAT 6 analyzers cover a wide range of

...
PDF Siemens Fidamat 6 (EN).PDF › Read more ›

SIPROCESS UV600 (UV)

Siemens extends its continuous process gas analytics portfolio with the new SIPROCESS UV600 analyzer providing solutions for an even wider range of applications. The SIPROCESS UV600 is an extractive UV gas analyzer that can simultaneously measure up to three components.  It is specialized for

...
PDF Siemens SIPROCESS UV600 (EN).PDF › Read more ›

LaserGas II SP

The NEO Monitors LaserGas II Single Path (SP) is a highly reliable gas analyser for true continuous in-situ monitoring. Single Path Monitors are designed for measurements across stacks, ducts, and reactors with typical path lengths of 0.5 – 20 m. By-pass and extractive configurations are also

...
PDF LaserGas II SP.PDF › Read more ›

LaserGas II SP Compact

The NEO Monitors LaserGas II Single Path Compact is a highly reliable gas analyser for true continuous in-situ monitoring. Single Path Monitors are designed for measurements across stacks, ducts, and reactors with typical path lengths of 0.1 to 1m. By-pass and extractive configurations are also

...
PDF LaserGas II SP Compact.PDF › Read more ›

LaserGas R2P

The LaserGasTM R2P combines Neo Monitors’ advanced Tunable Diode Laser Absorption Spectroscopy (TDLAS) technology with an extractive measurement cell in a compact analyser design. The measurement path length allows for very low detection limits. Heated measurement cells (up to 180°C) are also

...
PDF NEO Monitors LaserGas R2P.PDF › Read more ›

LaserGas II OP

NEO Monitors LaserGas II Open Path (OP) Monitor is a compact, high performance gas analyser for long distance monitoring in ambient air. Measurement lengths up to 1000 m one way are possible. The OP Monitor utilizes a transmitter / reflector configuration to measure the average gas concentration

...
PDF LaserGas II OP.PDF › Read more ›

Meridian Universal Gas Detector (Toxic and Combustibles)

The Meridian Universal Gas Detector from Scott Safety offers an innovative next generation gas detection solution. It‘s unique detector head is designed to accept all sensor types, whether electrochemical, catalytic bead, infrared or metal oxide semiconductor. Additionally, Meridian can support up

...
PDF Meridian.PDF › Read more ›

Freedom 5000 (Toxic)

The Freedom 5000 Series transmitters offer full-featured 4-20mA, loop powered transmitters designed to reliably detect toxic gases including O2. Its universal electronics and flexible, user-friendly features drive down gas detection costs for almost any facility.

 

FEATURES:

  • Freedom from
...
PDF Freedom 5000/5600.PDF › Read more ›

7200+ and 7400+ controllers

The Scott 7200 PLUS and 7400 PLUS Controllers are designed to provide simultaneous display and alarm functions for up to four monitored variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow

...
PDF 7200 PLUS and 7400 PLUS.PDF › Read more ›

7800 Controller

The 7800 Controller centralizes the display and alarm processing functions in critical multi-point gas and flame detection applications. Its modular design integrates easily with up to 32 gas or flame detectors and is available in a fiberglass or stainless steel NEMA-4X enclosure, a cast aluminum

...
PDF 7800 Controller.PDF › Read more ›

DX4000 Portable Stack Testing Analyzer

The Gasmet™ DX4000 is a portable FTIR gas analyzer which is typically used in stack emissions monitoring, comparison measurements, catalytic process control and other applications where multiple gas compounds need to be accurately monitored in hot & humid sample gas.  The corrosion resistant

...
PDF Gasmet DX4000.PDF › Read more ›

Turbidity Sensors

OPTEK inline turbidity meters, lab turbidimeters, and optical density probes can be specified to measure turbidity, haze, clarity, and optical density in units of: FTU, NTU, EBC, OD, PPM, Percent and many others. Common process other applications include: Filter performance and filter break

...
Read more ›

Color & Concentration Sensors

OPTEK colorimeters, VIS-NIR concentration analyzers, and color monitors are ideal for a multitude of real-time measurements for improved process control. Installed directly in process pipelines, tanks and vessels using flow-through and probe type sensors, these reliable analyzers can be configured

...
Read more ›

UV Absorption, Transmission & Concentration Sensors

OPTEK UV sensors can be effectively applied to a broad range of process applications measuring Ultra-violet absorbance, transmittance, optical density, and chemical concentrations from low parts-per-million (PPM), to high percent-levels. These UV analyzers can be calibrated non-intrusively to NIST-

...
Read more ›

C4000 Controller

The Control 4000 is a powerful, microprocessor-based photometric converter. The advanced modular design enables precision process monitoring and control. The flexible C4000 Controller is designed for Optek ultraviolet (UV), visible (VIS), near-infrared (NIR) absorption-based and scattered-light

...
PDF Optek General Brochure.PDF › Read more ›

C8000 Controller

The Control 8000 universal converter operates Optek photometric sensors along with 2 pH-probes and 2 conductivity sensors (Optek patented ACF series) simultaneously.
The C8000 provides optical density or forward scatter turbidity measurements in the ultraviolet (UV), visible (VIS), and near infrared

...
PDF Optek General Brochure.PDF › Read more ›

pH/ORP Sensors

The Barben Analytical Performance Series probe is a simple combination pH/ORP electrode. It is the best available pH/ORP sensor on the market for Industrial or “tough processes.” In +90% of industrial applications the reference cell is the main cause of sensor failure. Chemical attack from the

...
Read more ›

Conductivity Sensors

BAT offers Contacting Conductivity Sensors (in both 2-electrode & 4-electrode designs) and Toroidal Conductivity Sensors.  The toroidal design provides a wide range of chemical compatibilities and is highly resistant to scaling and other forms of performance loss due to chemical coating.  The 2-

...
Read more ›

Dissolved Oxygen Sensors

BAT Dissolved Oxygen sensor & measurement system offers a longer life in the toughest applications with the least maintenance and the most reliable measurement and control.  Sensors are individually configured to suit your process.



PDO2 luminescent DO System:

The PDO2 luminescent (fluorescence

...
Read more ›

4401OXY - Precision Optical Oxygen Analyzer

Precision Optical Trace Oxygen Measurement System

The 4401OXY analyzer optically measures oxygen in either the gas or liquid phase by utilizing quench fluorescence of an oxygen specific luminophore.

The analyzer is suitable for direct field installation (NEMA 4X) and in hazardous areas (Class I,

...
PDF 4401OXY - Precision Optical Oxygen Analyzer.PDF › Read more ›

Stratos ECO Series

Stratos ECO
The Stratos Eco series is intended for use in almost all standard applications.  The reliable 4-wire devices for the measurement of pH and ORP values, conductivity, or dissolved oxygen are the result of efficient product development.  Also Conductivity Inductive model avaliable. 

...
PDF Knick General Brochure.PDF › Read more ›

Stratos Pro Series

Stratos Pro Series 
Liquid analysis can now be seen in a completely new light.  The Stratos Pro, ground-breaking process analysers for the measurement of pH, ORP, conductivity, or dissolved oxygen.  The new process analyzers with models for safe areas and hazardous areas. For analog or digital

...
PDF Knick General Brochure.PDF › Read more ›

Portavo Series

Portable meters for analog / Memosens / Ex Memosens pH, Conductivity, Dissolved Oxygen sensors.

 

The Portavo Series are the first portable devices with Memosens technology for measuring pH, conductivity and oxygen.  They are compatible with almost all analog and Memosens process sensors,

...
PDF Portavo Series.PDF › Read more ›

QuickTOC_ULTRA

The QuickTOCultra is an on-line measuring system for the determination of total carbon (TC), total organic carbon (TOC), total inorganic carbon (TIC) and dissolved organic carbon (DOC) according to DIN EN 1484, ISO 8254 and EPA 415.1. The QuickTOCULTRA is suitable for almost every TOC measurement in

...
PDF LAR QuickTOC_ULTRA.PDF › Read more ›

QuickCOD

The QuickCOD is an on-line measuring system for the determination of the chemical oxygen demand (COD) by thermal combustion, within a minute, even in difficult sample matrices.  The QuickCOD is suitable for almost every COD measurement in sewage treatment and industrial waste water application.

...
PDF LAR QuickCOD.PDF › Read more ›

BioMonitor

The BioMonitor® from LAR is suitable for many different applications, e.g. for fast and reliable load ratio documentation of the influent and effluent of any plant with the aid of either the BOD concentration or the BOD load, for controlling the denitrification at the effluent of any plant by exact

...
PDF LAR BioMonitor.PDF › Read more ›

ODL-1600 Oil-on-Water Monitor

The  Model  ODL-1600  monitors  a  water  surface  for  the presence of an oil film floating on the surface. The instrument projects a laser beam onto the water surface and measures the differences in the reflection properties between water and oil.

This  model  is  the  most  recent  in  a  series

...
PDF ODL-1600.PDF › Read more ›

Calibration gas generators

Calibration Gas Generators for some of the most difficult corrosive gases such as Cl2, ClO2, H2S and more...

 

 

PDF ACD Cal2000.PDF › Read more ›

Calibration gas and accessories

Gasco offers a wide range of simple mixtures as well as complex four gas mixtures and highly reactive gas mixtures for gas detector calibration. This is complemented by a wide variety of standard cylinder sizes as well as cylinder regulators and different sorts of carrying cases

PDF Gasco products brochure.PDF › Read more ›

Modules, Isolators and Amplifiers

In industrial plants, the transmission of measuring and control signals almost always requires electrical isolation of the signals being processed both for safety reasons and in order to achieve optimum signal quality. Knick offers suitable components for electrical isolation in various designs to

...
Read more ›

ProLine P 44000

 


ProLine P 44000 Temperature Transmitter

 

The Task:  Precise temperature measurement at high voltage potentials up to 6.6 kV.

 

The Problem:  When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters are often

...
Read more ›