Home / Products / Industry / Cement

Cement



Thermox Combustion Analyzers

THERMOX analyzers are among the most established combustion monitoring and control devices available today. A broad range of products are available for analyzing oxygen, combustibles, and hydrocarbon in flue gases for combustion control, safety, and NOx reduction strategies.


WDG-V Combustion

...
Read more ›

CEMS

Continuous emission monitoring systems are used as a means to ensure that stack emissions are in compliance with applicable air emission standards and regulations. 

 

Novatech designs, manufactures and commissions complete CEM systems offering enhanced reliability and uptime, even for the most

...
PDF Novatech Analytical Solutions.PDF › Read more ›

Process Gas and Liquid Analysis Systems

The operation of the majority of industrial process facilities requires the use of online gas or liquid analyzers to provide fast, reliable, and accurate feedback of conditions within processing units. 


Many analytical techniques are extractive in nature, requiring that a sample of the process

...
PDF Novatech Analytical Solutions.PDF › Read more ›

Analyzer Shelters

The successful outdoor installation and operation of process or environmental analyzers requires that they be protected from environmental hazards coming from the process itself as well as rain, snow and temperature extremes.  One must also consider the working conditions for maintenance technicians

...
PDF Novatech Analytical Solutions.PDF › Read more ›

Purge & Validation Systems for NEO TDL Analysers

The benefits of NEO’s advanced TDLAS (Tunable Diode Laser Absorption Spectroscopy) technology will be maximized with proper application assessment, proper installation and proper auxiliary equipment.


Novatech has developed an enviable expertise with NEO TDL analysers over the years and offers a

...
PDF Novatech Analytical Solutions.PDF › Read more ›

Oxymat 6 (O2)

The Siemens OXYMAT 6 measures oxygen using the paramagnetic alternating pressure method. This guarantees perfect linearity and allows measuring ranges from 0 to 0.5 % (detection limit 50 ppm) up to 0 to 100% in a single device, and even 99.5 to 100%.  The sensor in the detector never comes into

...
PDF Siemens Oxymat 6 (EN).PDF › Read more ›

Oxymat 61 (O2)

The Siemens OXYMAT 61 is an oxygen analyzer for standard applications. The OXYMAT 61 requires ambient air as its reference gas. This is supplied by a pump that is integrated into the analyzer housing. Alternatively compressed bottled reference gas can be used.

 

The OXYMAT 61 measures oxygen using

...
PDF Siemens Oxymat 61 (EN).PDF › Read more ›

Sample Draw Gas Detection Systems

In order to safely detect certain gases which may be lighter or heavier than air, it is always advisable to locate the sensor where the target gas may accumulate. This however, can lead to difficulty in accessing the sensor for routine maintenance & service.


For these situations, Novatech

...
PDF Novatech Analytical Solutions.PDF › Read more ›

Ultramat 6 (IR)

The Siemens ULTRAMAT 6 is an analyzer in 19” rack mount or field housing. Measurement of up to four infrared active components in a single unit is possible. It can be used in all applications from emission measurement to process control, even in the presence of highly corrosive gases.

 

The

...
PDF Siemens Ultramat 6 (EN).PDF › Read more ›

Ultramat 23 (Multi-IR, O2)

The Siemens ULTRAMAT 23 is a cost-effective multicomponent analyzer for the measurement of up to 3 infrared sensitive gases using the NDIR principle, plus O2 using an electrochemical or paramagnetic Oxygen measuring cell.

 

The ULTRAMAT 23 is suitable for a wide range of standard applications,

...
PDF Siemens Ultramat 23 (EN).PDF › Read more ›

Ultramat / Oxymat 6 (IR + O2)

The Siemens ULTRAMAT/OXYMAT 6 "Combi-Analyzer" combines the features of the ULTRAMAT 6 and OXYMAT 6 in one analyzer in a 19" rack design.

Most frequently used for demanding applications, the ULTRAMAT 6 must meet high standards with regard to reliability and measuring quality. This is guaranteed by

...
PDF Siemens Ultramat / Oxymat 6 (EN).PDF › Read more ›

Fidamat 6 (Total Hydrocarbons)

Gas analyzers with an FID (flame ionization detector) are well suited for the continuous measurement of total hydrocarbons. To a first approximation, the display is proportional to the number of C atoms in the respective molecule.

 

The Siemens FIDAMAT 6 analyzers cover a wide range of

...
PDF Siemens Fidamat 6 (EN).PDF › Read more ›

SIPROCESS UV600 (UV)

Siemens extends its continuous process gas analytics portfolio with the new SIPROCESS UV600 analyzer providing solutions for an even wider range of applications. The SIPROCESS UV600 is an extractive UV gas analyzer that can simultaneously measure up to three components.  It is specialized for

...
PDF Siemens SIPROCESS UV600 (EN).PDF › Read more ›

LaserGas iQ2 Multigas

NEO Monitors’ LaserGas™ iQ2 analyzer is the first to measure four gases (O2, CO, CH4, H2O) and temperature in one unit, which eliminates the need for multiple units for combustion analysis. The cutting-edge design and ground-breaking functionality, ensures that the instrument delivers unmatched

...
PDF NEO LaserGas iQ2.PDF › Read more ›

LaserGas II SP

The NEO Monitors LaserGas II Single Path (SP) is a highly reliable gas analyser for true continuous in-situ monitoring. Single Path Monitors are designed for measurements across stacks, ducts, and reactors with typical path lengths of 0.5 – 20 m. By-pass and extractive configurations are also

...
PDF LaserGas II SP.PDF › Read more ›

LaserGas II SP Compact

The NEO Monitors LaserGas II Single Path Compact is a highly reliable gas analyser for true continuous in-situ monitoring. Single Path Monitors are designed for measurements across stacks, ducts, and reactors with typical path lengths of 0.1 to 1m. By-pass and extractive configurations are also

...
PDF LaserGas II SP Compact.PDF › Read more ›

LaserGas III SP NH3

The LaserGas™ III SP NH3 analyzer (3rd generation) is specially designed for operation in hazardous areas and it provides real time in-situ NH3 measurements for virtually any type of DeNOx system. The configuration is based on  transmitter/receiver units for cross-duct/stack installation. An

...
PDF NEO LaserGas III SP NH3.PDF › Read more ›

LaserGas Q

The NEO Monitors LaserGas™ Q Series are based on Tuneable Laser Absorption Spectroscopy (TLAS) - a non-contact optical measurement technique employing solid-state laser sources. The sensor remains unaffected by contaminants and corrosives and does not require regular maintenance. The absence of an

...
Read more ›

LaserGas II MP

The LaserGas II Multipass (MP) Monitor employs NEO Monitors' TDLAS technology in a multipass cell concept to combine long measurement path lengths with a compact analyser design. The long path will enhance the detection limit. Thus, the MP is the analyser of choice for measurement of trace levels of

...
PDF LaserGas II MP.PDF › Read more ›

Freedom 5000 (Toxic)

The Freedom 5000 Series transmitters offer full-featured 4-20mA, loop powered transmitters designed to reliably detect toxic gases including O2. Its universal electronics and flexible, user-friendly features drive down gas detection costs for almost any facility.

 

FEATURES:

  • Freedom from
...
PDF Freedom 5000/5600.PDF › Read more ›

7200+ and 7400+ controllers

The Scott 7200 PLUS and 7400 PLUS Controllers are designed to provide simultaneous display and alarm functions for up to four monitored variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow

...
PDF 7200 PLUS and 7400 PLUS.PDF › Read more ›

7800 Controller

The 7800 Controller centralizes the display and alarm processing functions in critical multi-point gas and flame detection applications. Its modular design integrates easily with up to 32 gas or flame detectors and is available in a fiberglass or stainless steel NEMA-4X enclosure, a cast aluminum

...
PDF 7800 Controller.PDF › Read more ›

CEMS II (FTIR)

The Gasmet™ CEMS II is used for continuous emissions monitoring in waste incinerators and cement plants. In addition, various process monitoring applications are also possible. Typically, concentrations of H2O, CO2, CO, SO2, NO, NO2, N2O, HCl, HF, NH3, O2 and TOC (Total Organic Carbon) are

...
PDF Gasmet General Brochure.PDF › Read more ›

Extractive Gas Analyzers (FTIR)

The Gasmet™ On-line - series features FTIR gas analysers for quality control, process and emission monitoring applications.  The CX-Series of extractive analyzers with temperature controlled sample cells are used in the Gasmet CEMS systems, and allow the measurement of up to 50 different components.

...
PDF Gasmet General Brochure.PDF › Read more ›

In-Situ Analyzer (FTIR)

The Gasmet™ In-Situ analyser consists of a sample cell inserted into the stack or duct, heated steel mounting flange and the rugged GICCOR™ interferometer unit in an IP65 enclosure that is directly attached to the flange.

 

Gasmet™ In-Situ offers a cost-effective alternative for extractive systems

...
PDF Gasmet General Brochure.PDF › Read more ›

DX4000 Portable Stack Testing Analyzer

The Gasmet™ DX4000 is a portable FTIR gas analyzer which is typically used in stack emissions monitoring, comparison measurements, catalytic process control and other applications where multiple gas compounds need to be accurately monitored in hot & humid sample gas.  The corrosion resistant

...
PDF Gasmet DX4000.PDF › Read more ›

pH/ORP Sensors

The Barben Analytical Performance Series probe is a simple combination pH/ORP electrode. It is the best available pH/ORP sensor on the market for Industrial or “tough processes.” In +90% of industrial applications the reference cell is the main cause of sensor failure. Chemical attack from the

...
Read more ›

Conductivity Sensors

BAT offers Contacting Conductivity Sensors (in both 2-electrode & 4-electrode designs) and Toroidal Conductivity Sensors.  The toroidal design provides a wide range of chemical compatibilities and is highly resistant to scaling and other forms of performance loss due to chemical coating.  The 2-

...
Read more ›

Dissolved Oxygen Sensors

BAT Dissolved Oxygen sensor & measurement system offers a longer life in the toughest applications with the least maintenance and the most reliable measurement and control.  Sensors are individually configured to suit your process.



PDO2 luminescent DO System:

The PDO2 luminescent (fluorescence

...
Read more ›

4401OXY - Precision Optical Oxygen Analyzer

Precision Optical Trace Oxygen Measurement System

The 4401OXY analyzer optically measures oxygen in either the gas or liquid phase by utilizing quench fluorescence of an oxygen specific luminophore.

The analyzer is suitable for direct field installation (NEMA 4X) and in hazardous areas (Class I,

...
PDF 4401OXY - Precision Optical Oxygen Analyzer.PDF › Read more ›

Stratos ECO Series

Stratos ECO
The Stratos Eco series is intended for use in almost all standard applications.  The reliable 4-wire devices for the measurement of pH and ORP values, conductivity, or dissolved oxygen are the result of efficient product development.  Also Conductivity Inductive model avaliable. 

...
PDF Knick General Brochure.PDF › Read more ›

Stratos Pro Series

Stratos Pro Series 
Liquid analysis can now be seen in a completely new light.  The Stratos Pro, ground-breaking process analysers for the measurement of pH, ORP, conductivity, or dissolved oxygen.  The new process analyzers with models for safe areas and hazardous areas. For analog or digital

...
PDF Knick General Brochure.PDF › Read more ›

Series 9000 H Heated Hydrocarbon Analyser

The Baseline® Series 9000 H is a high-temperature member of the extraordinary Series 9000 family of gas analyzers. The Series 9000 is the candidate of choice whenever accurate, reliable hydrocarbon analysis is required. The analyzer is based on a flame ionization detector (FID) with FlowGuard

...
PDF Baseline 9000H.PDF › Read more ›

9000 NMHC NonMethane Hydrocarbon Analyser

The Baseline® Series 9000 NMHC is a specialized member of the extraordinary Series 9000 family of gas analyzers. The Series 9000 is the candidate of choice whenever accurate, reliable total, Methane, and NonMethane analysis is required. The Series 9000 analyzer provides unparalleled flexibility and

...
PDF Baseline 9000NMHC.PDF › Read more ›

Calibration gas generators

Calibration Gas Generators for some of the most difficult corrosive gases such as Cl2, ClO2, H2S and more...

 

 

PDF ACD Cal2000.PDF › Read more ›

Calibration gas and accessories

Gasco offers a wide range of simple mixtures as well as complex four gas mixtures and highly reactive gas mixtures for gas detector calibration. This is complemented by a wide variety of standard cylinder sizes as well as cylinder regulators and different sorts of carrying cases

PDF Gasco products brochure.PDF › Read more ›

Modules, Isolators and Amplifiers

In industrial plants, the transmission of measuring and control signals almost always requires electrical isolation of the signals being processed both for safety reasons and in order to achieve optimum signal quality. Knick offers suitable components for electrical isolation in various designs to

...
Read more ›

ProLine P 44000

 


ProLine P 44000 Temperature Transmitter

 

The Task:  Precise temperature measurement at high voltage potentials up to 6.6 kV.

 

The Problem:  When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters are often

...
Read more ›